Can we stain a wooden swing set that has already been painted? - wooden swing set blueprints and material list
... or do you have to be deleted again? What are the steps for painting? What are the steps for coloring, if possible. It is very important ... We need as easy as possible! Thank you!
Saturday, December 12, 2009
Wooden Swing Set Blueprints And Material List Can We Stain A Wooden Swing Set That Has Already Been Painted?
8 comments:
Channel intends to penetrate into the wood, it is already painted, you can not cover. To paint what you need to get all the loose first color to be removed by grinding. Paint, depending on the severity of the existing, you must start with a coarse grain, 80, then continue using the finer grains to obtain (100120220) to the pre-finished surface desired. For a swing outside 220 should be sufficient.
Then, with a finish of high quality exterior. Read the instructions on the box, and thus the right time to dry.
Then, the sand layer with the first 220-grit sandpaper or finer.
You are now ready to paint.
Every seller must give you, with primer and paint brush and used properly.
Channel intends to penetrate into the wood, it is already painted, you can not cover. To paint what you need to get all the loose first color to be removed by grinding. Paint, depending on the severity of the existing, you must start with a coarse grain, 80, then continue using the finer grains to obtain (100120220) to the pre-finished surface desired. For a swing outside 220 should be sufficient.
Then, with a finish of high quality exterior. Read the instructions on the box, and thus the right time to dry.
Then, the sand layer with the first 220-grit sandpaper or finer.
You are now ready to paint.
Every seller must give you, with primer and paint brush and used properly.
One can not, unless all the tapes - the bare wood to paint. Steps to painting. I would like a latex paint and a brush. Make sure the swing is clean. Then you paint the swing. Brushes - paint rollers - or what ever you use to paint with the swing, \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\. Good luck.
For the color, all colors must be removed. There are paint strippers on the market, paint and create alow to half an hour, then is dried. It may be a second attempt to get all the images.
Then you can stain the bare wood and put a layer of polyurethane for the last
the place was designed to have to be removed to soak into the wood for all the paint, so I think u just sand and repaint
Cabot stain opaque latex-based, like his painting, but a better supply and can be used to color
Sorry, you need to take the picture before hand.
nope City
Post a Comment