A series of questions about heating: wood stoves, pellet, furnace ect? Kansas City? - modern wood stoves
It would be nice if you have a wood stove in Kansas City, MO use.? People use here?
What is better, a pellet stove or wood stove?
What have you done for modern wood stoves in order to improve? What is a catalyst? I wonder what he wants, because I think the purchase of used and want to know if I edit an old man. Is there a big difference between old and new?
Are masonry stoves, oil stoves, or what they are good?
When you return my window, a vent pipe in the basement does my roof?
Is it important to have a coating of refractory bricks in a wood stove, and why? What has made the best material for your iron stove? Is it better to make thicker? And they are hot to the touch?
Finally, as for furnaces in the whole house vent that works better and save energy and the amount of gas or electric? And what is an electric heat pump instead of a regular oven?
Tuesday, January 5, 2010
Modern Wood Stoves A Series Of Questions About Heating: Wood Stoves, Pellet, Furnace Ect? Kansas City?
1 comment:
Check your local laws to see whether they have a wood stove, where you live and what kind they can install approved. You probably need an EPA approved one of those days.
Do not even think to change "an old woman. They are very well developed, especially, unless you are an expert is more likely to ruin an improved stove.
Catalytic system was designed to burn off some of the new stove that emits less exhaust. There are other ways to achieve the same objective. Your choice as you want.
Pellet very well for some people, but they need electricity to operate, are not so good for use during a power failure. And you can not get pellets, you can do with wood. At Home Depot, is of pellets, when you need it, you SOL if your oven. Pellet stoves typically have a higher efficiency.
For the purposes of the fireplace, check the local rules again, but in general, the chimney should be far from anywhere in your house, does not disturb theAirflow. Two or three feet above the closest to within 10 feet is a rough guide for the placement of the chimney.
Masonry and stoves, oil stoves are two completely different things.
Some stoves have firebrick, others not. It is usually done in steel furnaces from. The occupation is a sufficient mass of refractory bricks, which is not necessary. I prefer cast iron, but it's hard. Wood stoves can be very hot, it's generally hotter at the front, top and side burner when the boiler is on one side.
Post a Comment